Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Ein direkter Befehl überspringt den Prüf-Prompt. Prüfen Sie die Quelle, bevor Sie ihn ausführen.
Operate the seven Huawei Cloud CodeArts services that are NOT project planning/design — CodeArts Repo, Check, Build, Artifact, TestPlan, Deploy, and Pipeline — using hcloud CLI (KooCLI) as the only mechanism. For each service this skill discovers existing resources, and where an operation's parameters are confirmed against its own API Reference page, creates/modifies and verifies them. Where an operation cannot be confirmed (most notably build-task creation/execution), this skill documents the gap explicitly and routes to a live probe, the console, or CodeArts Pipeline, instead of inventing a command.
This skill is the operational counterpart to the companion huawei-codearts-project-design skill, which owns CodeArts Req (ProjectMan) project planning and creation. This skill never creates, renames, or deletes a CodeArts project; it only resolves an already-existing project_id.
Supported scenario
Source: an operation intent naming exactly one target service (repo, check, build, artifact, testplan, deploy, or pipeline) and an action (discover, create, or verify)
Target: a resource within that service (repository, check task, build task config, artifact repository, test plan/case, host cluster/environment/deployment task, or pipeline/pipeline run), fully identified by its own ID
Mechanism: each service's own REST API called through hcloud CLI, under that service's own hcloud service name (see table below); no dedicated MCP exists for any of the seven
Storage: none beyond the artifacts this skill itself generates
Topology: single-region, single-service operation per invocation
Service
hcloud service name
Former/legacy name
CodeArts Repo
CodeArtsRepo
CodeHub
CodeArts Check
CodeCheck
CodeCheck (this is still the current KooCLI/API Explorer service name)
CodeArts Build
CodeArtsBuild
CodeCI / CloudBuildEx
CodeArts Artifact
CodeArtsArtifact
CloudArtifact
CodeArts TestPlan
CloudTest
CloudTest (this is still the current KooCLI/API Explorer service name)
CodeArts Deploy
CodeArtsDeploy
CloudDeploy
CodeArts Pipeline
CodeArtsPipeline
CloudPipeline
When to use this skill
Creating or listing CodeArts Repo repositories, and querying their details
Listing CodeArts Check tasks and reading their code-quality metrics and issues
Inspecting CodeArts Build task configuration differences (the only confirmed operation for this service)
Listing CodeArts Artifact package repositories and querying Maven repository/credential info
Listing CodeArts TestPlan test plans and attaching existing test cases to a plan
Creating a CodeArts Deploy host cluster, listing environments/hosts, and starting an existing deployment task
Listing CodeArts Pipelines, running a pipeline, and checking a pipeline run's status
Auditing what resources exist across any of these seven services in a tenant/region/project
When not to use this skill
Creating, renaming, deleting, or configuring the basic design of a CodeArts Req (ProjectMan) project — use the companion huawei-codearts-project-design skill
Managing work items, iterations, sprints, or Wiki content inside a project — out of scope for both this skill and the project-design skill
Authoring a CodeArts Pipeline's stage/job graph from scratch via CLI — this skill runs and inspects pipelines whose definition already exists (console, YAML, or an externally supplied definition payload)
Uploading/downloading actual package files to/from a CodeArts Artifact repository, or performing git operations (clone/push/pull/merge) against a CodeArts Repo repository — use the package manager or git CLI directly, not hcloud
Creating or starting a CodeArts Check task, or creating/running a CodeArts Build task, when no confirmed hcloud operation exists for that action (see the per-service capability gaps) and neither the console nor a CodeArts Pipeline substitute is acceptable to the requester
When hcloud CLI is not available and cannot be installed
action (discover, create, or verify — the create action is only available for the services/operations listed as confirmed or freshly probed in # Per-service operations)
source_region
project_id or project_name (used to resolve project_id via ProjectMan)
approval_owner (required whenever action is create)
description (where the target operation supports one)
Required MCPs
None. All operations across all seven services are performed via hcloud CLI.
Optional MCPs
huaweicloud-ticket (only to open a support ticket if a capability-gap probe fails for a critical-path operation and manual escalation is desired)
Tool selection policy
Use hcloud CLI for ALL operations across CodeArts Repo, Check, Build, Artifact, TestPlan, Deploy, and Pipeline: discovery, creation (where confirmed), and verification
Never use a generic hcloud CodeArts ... service name; each service has its own distinct name (CodeArtsRepo, CodeCheck, CodeArtsBuild, CodeArtsArtifact, CloudTest, CodeArtsDeploy, CodeArtsPipeline) — using the wrong one, or inventing CodeArts as a catch-all, is a Rule violation, not a shortcut
Never assume an operation not in a service's confirmed-operations table (see # Per-service operations) is available without probing it live first (hcloud <SERVICE_NAME> <OPERATION> --help)
Never use huaweicloud-ticket to substitute a missing capability with an invented command; it is for support escalation only
Never use this skill to create, rename, or delete a CodeArts Req project; resolve project_id read-only via hcloud ProjectMan ListProjectsV4 and otherwise defer to the companion project-design skill
For CodeArts Build specifically, if no create/run operation can be confirmed live, prefer routing the build through an already-defined CodeArts Pipeline job over the console when both are acceptable to the requester, since it keeps the action auditable through this same skill's Pipeline module
Safety and approval gates
Any create/update/start/run operation (across any of the seven services) requires explicit approval before execution
Reusing an existing resource instead of creating a new one (for example, a repository that already exists with the intended name) requires explicit confirmation from the approval owner
Any delete/stop-style rollback action requires explicit approval and must first be confirmed to actually exist for that service (see # Rollback below) — never assumed
Starting a CodeArts Deploy deployment task or running a CodeArts Pipeline are treated as high-impact write actions (they can affect running environments) and require explicit approval every time, even on repeat requests
Adding members/roles to a CodeArts Repo repository, or attaching test cases to a CodeArts TestPlan plan, requires explicit approval
Rules
Each of the seven services in this skill's scope is exposed through hcloud CLI under its own distinct service name; there is no generic CodeArts service name and no dedicated MCP for any of them. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Repo is exposed under the hcloud service name CodeArtsRepo (formerly CodeHub). Confirmed operations with a fully verified parameter table: CreateRepository, ListUserAllRepositories, ShowRepository. AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, and DeleteRepository are confirmed to exist for CodeArtsRepo (listed by hcloud CodeArtsRepo --help / API Explorer), but their exact parameter sets were not independently checked against each operation's own API Reference page during authoring. [VERIFIED_FROM_PUBLIC_API_DOCS] [PROBE_HELP_BEFORE_USE]
CodeArts Check is exposed under the hcloud service name CodeCheck (formerly CodeCheck (this is still the current KooCLI/API Explorer service name)). Confirmed operations with a fully verified parameter table: ShowTaskListByProjectIdV2, ShowTaskCmetrics, ShowTaskDetailV2, ShowTaskDefectsV2. No operation to create or trigger-run a check task was found in the public CodeArts Check API Reference under the CodeCheck service; check tasks are created and started from the CodeArts Check console or from a CodeArts Pipeline job. This skill only lists tasks and reads their metrics/issues via hcloud; it does not create or start check tasks. [VERIFIED_FROM_PUBLIC_API_DOCS] [USE_CONSOLE_OR_PIPELINE_FOR_CREATE]
CodeArts Build is exposed under the hcloud service name CodeArtsBuild (formerly CodeCI / CloudBuildEx). Confirmed operations with a fully verified parameter table: ShowJobConfigDiff. This is this skill's most significant capability gap, analogous to CreateProjectV4 in the companion CodeArts Req skill. The legacy build-task operations (CreateBuildJob, UpdateBuildJob, ListDeployTasks-style job listing) live under the older 'CodeCI' API namespace and several are explicitly marked deprecated or 'Out-of-date'/'Unavailable Soon' in their own API Reference pages. The current, non-deprecated CodeArtsBuild namespace only had ShowJobConfigDiff confirmed with a full parameter table at authoring time. No create-build-task or run/start-build-task operation could be confirmed under the current CodeArtsBuild service name. Before relying on any create/run/list build operation, this skill MUST probe hcloud CodeArtsBuild --help live and cross-check the operation's own API Explorer 'CLI Examples' tab; if the operation is missing, deprecated, or its parameters cannot be confirmed, use the CodeArts Build console, or drive the build through a CodeArts Pipeline job (see the pipeline module) instead of guessing a command. [VERIFIED_FROM_PUBLIC_API_DOCS] [PROBE_THEN_FALLBACK_TO_PIPELINE_OR_CONSOLE]
CodeArts Artifact is exposed under the hcloud service name CodeArtsArtifact (formerly CloudArtifact). Confirmed operations with a fully verified parameter table: ListAllRepositories, ShowMavenInfo, ShowFileTree. CreateArtifactory (creating a non-Maven repository) is confirmed to exist by name (it appears as the documented 'next topic' after DeleteRepository in the Repository Management section) but its full request-body parameter table was not independently fetched/verified during authoring. Probe hcloud CodeArtsArtifact CreateArtifactory --help and cross-check the CLI Examples tab before scripting a create call. [VERIFIED_FROM_PUBLIC_API_DOCS] [PROBE_HELP_BEFORE_USE]
CodeArts TestPlan is exposed under the hcloud service name CloudTest (formerly CloudTest (this is still the current KooCLI/API Explorer service name)). Confirmed operations with a fully verified parameter table: CreateTestCaseInPlan. ShowPlans (listing test plans in a project) is confirmed to exist and to sit immediately before CreateTestCaseInPlan in the Test Plan Management section (GET .../plans, consistent with the sibling path .../plans/{plan_id}/testcases/batch-add), but its own query-parameter table was not independently fetched. In addition, KooCLI's exact CLI syntax for the testcase_id_list ARRAY body parameter of CreateTestCaseInPlan was not observed live; confirm the current array syntax with hcloud CloudTest CreateTestCaseInPlan --help or the operation's CLI Examples tab before scripting it, rather than guessing a bracket/comma format. [VERIFIED_FROM_PUBLIC_API_DOCS] [PROBE_HELP_BEFORE_USE]
CodeArts Deploy is exposed under the hcloud service name CodeArtsDeploy (formerly CloudDeploy). Confirmed operations with a fully verified parameter table: CreateHostCluster, ListEnvironments, ListEnvironmentHosts, StartDeployTask. The application/task-listing operation ListDeployTasks (GET /v2/{project_id}/tasks/list) is confirmed to exist and confirmed under the CodeArtsDeploy service name, but its own API Reference page explicitly states it 'will not be maintained after September 30, 2024' and directs callers to use ListAllApp instead; ListAllApp's parameters were not independently verified during authoring. Do not use ListDeployTasks for new automation; probe hcloud CodeArtsDeploy ListAllApp --help first, and treat deployment-task/application listing as needing live confirmation. [VERIFIED_FROM_PUBLIC_API_DOCS] [AVOID_DEPRECATED_OP_PROBE_REPLACEMENT]
CodeArts Pipeline is exposed under the hcloud service name CodeArtsPipeline (formerly CloudPipeline). Confirmed operations with a fully verified parameter table: CreatePipelineNew, RunPipeline, ShowPipelineRunDetail. ListPipelines is confirmed to exist (its JSON response shape was observed in the public API Reference example), but its query-parameter table (pagination fields such as offset/limit, and any filters) was not independently fetched during authoring. CreatePipelineNew's 'definition' body field is a large nested JSON structure (stages/jobs/steps) whose full schema was only partially observed via example payloads; do not hand-author a 'definition' value from guesswork — generate it from the console's 'Create Pipeline' / YAML editor, or from a previously exported pipeline, and pass it through unmodified. [VERIFIED_FROM_PUBLIC_API_DOCS] [PROBE_HELP_AND_REUSE_CONSOLE_EXPORTED_DEFINITION]
DISCOVER BEFORE CREATE: for every service, always run its discovery/list operation before creating anything; never hardcode project_id, repository_uuid, task_id, job_id, application_id, environment_id, plan_id, or pipeline_id — resolve them via read operations. [VERIFIED_FROM_PUBLIC_API_DOCS]
VERIFY AFTER EVERY WRITE: every create/update/start/run operation must be followed by that same service's read/verify operation (see # Per-service operations). [VERIFIED_FROM_PUBLIC_API_DOCS]
Every write operation requires explicit approval before execution. [INFERRED]
This skill's scope excludes CodeArts Req (ProjectMan) project planning/design entirely; it only resolves an existing project_id via hcloud ProjectMan ListProjectsV4 and never creates, renames, or deletes a project. [INFERRED] (explicit scope boundary requested when this skill was authored)
Never include secrets (AK, SK, tokens, passwords) in commands, examples, files, or logs; use the credentials already configured in the local hcloud profile. [INFERRED]
Each of the seven service modules is independent: a request scoped to one service must not require having exercised any other service's workflow first, and must not silently issue commands against a different service to compensate for a gap. [INFERRED] (explicit design requirement requested when this skill was authored)
This skill was authored and verified from the official public CodeArts API Reference pages for each of the seven services (specifically each operation's own "Online Debugging"/"CLI Examples" link, which exposes the literal hcloud service name). It was not executed against a live hcloud CLI installation or a live Huawei Cloud tenant. The first real use of this skill for any given service in any environment MUST start with that service's discovery probe (hcloud <SERVICE_NAME> --help) before relying on any operation not in its confirmed-operations table. [NOT_LIVE_TESTED]
Prerequisites
Tool or resource
Required
Purpose
Verification
hcloud CLI (KooCLI)
Yes
All operations across all seven services
hcloud version
Huawei Cloud authentication (AK/SK)
Yes
API access
hcloud configure show --cli-profile=default
An existing CodeArts project
Yes
project_id required by nearly every operation in scope
hcloud ProjectMan ListProjectsV4 --search=
Target region (CodeArts-supported)
Yes
Service region/endpoint
Confirm via a successful hcloud <SERVICE_NAME> --help/discovery call
Per-service resource-creation permission
Only if action=create
Ability to create/modify the target resource
Confirmed only by a successful call or console check
This skill does not create these container resources for Check, Build, TestPlan, Deploy, or Pipeline — only operates within them
See # Prerequisites above
huaweicloud-ticket MCP
No
Support escalation if a capability gap blocks a request
MCP availability check
See # Prerequisites above for full detail.
Workflow
This skill's workflow has a short, generic front section (parse intent, discover auth/region/project) common to all seven services, followed by exactly one per-service module selected by target_service. The per-service modules are NOT sequential steps of one pipeline — only the module matching the request's target_service is executed.
STEP 1 — PARSE INTENT
Classification: AUTOMATED
Objective: Extract and validate target_service, action, region, project reference, and any service-specific identifiers.
Inputs: User request.
Preconditions: None.
Command: None (parsing logic).
Approval requirement: None.
Verification: Confirm target_service is exactly one of repo, check, build, artifact, testplan, deploy, pipeline, and action is one of discover, create, verify.
Expected result: Complete intent object with a single target_service.
Failure action: If target_service is missing, ambiguous, or not one of the seven, STOP and request clarification. Do not guess which service was meant.
Failure action: STOP. If zero or multiple projects match, do not guess; if zero, this indicates the project-design step (a different skill) has not run yet.
Objective: Confirm the target service responds and list its operations.
Inputs: target_service.
Preconditions: Step 2 completed.
Command (read-only): hcloud <SERVICE_NAME> --help, using the exact service name from the table in # Supported scenario above.
Approval requirement: None.
Verification: The command lists operations rather than erroring.
Expected result: Target service confirmed reachable; the confirmed/unconfirmed operation split for this service (see # Per-service operations) is reviewed.
Failure action: STOP. Report the region/service/connectivity error.
Objective: Execute the per-service Discover → (Plan) → Execute → Verify sequence documented in # Per-service operations, using ONLY that service's confirmed (or freshly-probed) operations.
If action is discover: run only the discovery command from that file; stop after recording results.
If action is create: request explicit approval, then run the create command from that file (only if it is a confirmed operation, or was freshly probed successfully), then immediately run the verify command.
If action is verify: run the verify command from that file directly (useful for re-checking a resource created in a previous run).
Approval requirement: EXPLICIT for any create/write action; none for discover/verify.
Verification: Per the target service's file.
Expected result: The requested resource state confirmed.
Failure action: STOP on any error; do not retry with a different, invented command; do not fall back to a different service without a new approval and a documented reason (Build → Pipeline is the one pre-approved fallback pattern, and even that still needs explicit approval for the Pipeline run itself).
Objective: Generate final summary, evidence, and follow-up actions.
Inputs: All artifacts from Steps 1-4.
Preconditions: All previous steps completed.
Generate:
Final summary (target_service, operation used, action, region, project_id, result)
Capability probe result for the target service (so future runs against the same tenant/CLI version can skip re-probing confirmed operations, but MUST re-probe any operation still marked unconfirmed)
Warnings (for example, if a known gap was encountered and routed to the console/Pipeline fallback)
Explicit statement that no other of the seven services, and no CodeArts Req project data, was touched during this run
Follow-up actions
Unresolved risks
Do NOT perform any rollback/delete action automatically in this closure step.
Operations that exist but were not independently parameter-verified: AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, DeleteRepository. Probe these with hcloud CodeArtsRepo <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-101): AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, and DeleteRepository are confirmed to exist for CodeArtsRepo (listed by hcloud CodeArtsRepo --help / API Explorer), but their exact parameter sets were not independently checked against each operation's own API Reference page during authoring.
Out of scope for this service module: Repository content operations (git clone/push/pull, file edits, merge requests) are performed with the git CLI or the console, never with hcloud; hcloud only manages repository resources (create/list/show/branches/members/keys).
CodeArts Check (service name: CodeCheck, formerly CodeCheck (this is still the current KooCLI/API Explorer service name))
Static and security code-quality checks on a repository.
Confirmed operations (full parameter table verified against the operation's own API Reference page):
Operation
HTTP method / path
Key parameters
ShowTaskListByProjectIdV2
GET /v2/{project_id}/tasks
project_id (path), offset, limit
ShowTaskCmetrics
GET /v2/{project_id}/tasks/{task_id}/metrics-summary
project_id (path), task_id (path)
ShowTaskDetailV2
GET /v2/tasks/{task_id}/defects-summary
task_id (path)
ShowTaskDefectsV2
GET /v2/tasks/{task_id}/defects-detail
task_id (path), status_ids
Operations that exist but were not independently parameter-verified: StopTaskByIdV2. Probe these with hcloud CodeCheck <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-102): No operation to create or trigger-run a check task was found in the public CodeArts Check API Reference under the CodeCheck service; check tasks are created and started from the CodeArts Check console or from a CodeArts Pipeline job. This skill only lists tasks and reads their metrics/issues via hcloud; it does not create or start check tasks.
Out of scope for this service module: Rule configuration, quality gates, and check-profile management are not covered; only read operations on tasks already created elsewhere.
Compiles source code into build artifacts and packages configuration/resource files.
Confirmed operations (full parameter table verified against the operation's own API Reference page):
Operation
HTTP method / path
Key parameters
ShowJobConfigDiff
GET /v1/job/{job_id}/diff
job_id (path), original_no, revisedl_no
Operations that exist but were not independently parameter-verified: none. Probe these with hcloud CodeArtsBuild <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-103): This is this skill's most significant capability gap, analogous to CreateProjectV4 in the companion CodeArts Req skill. The legacy build-task operations (CreateBuildJob, UpdateBuildJob, ListDeployTasks-style job listing) live under the older 'CodeCI' API namespace and several are explicitly marked deprecated or 'Out-of-date'/'Unavailable Soon' in their own API Reference pages. The current, non-deprecated CodeArtsBuild namespace only had ShowJobConfigDiff confirmed with a full parameter table at authoring time. No create-build-task or run/start-build-task operation could be confirmed under the current CodeArtsBuild service name. Before relying on any create/run/list build operation, this skill MUST probe hcloud CodeArtsBuild --help live and cross-check the operation's own API Explorer 'CLI Examples' tab; if the operation is missing, deprecated, or its parameters cannot be confirmed, use the CodeArts Build console, or drive the build through a CodeArts Pipeline job (see the pipeline module) instead of guessing a command.
Out of scope for this service module: Build task creation/editing, build templates, and build-environment configuration are not automated by this skill; only configuration-diff inspection of an existing task is confirmed.
Operations that exist but were not independently parameter-verified: CreateArtifactory, DeleteRepository, ListChildProxyRepositoriesList, ListArtifactoryComponent. Probe these with hcloud CodeArtsArtifact <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-104): CreateArtifactory (creating a non-Maven repository) is confirmed to exist by name (it appears as the documented 'next topic' after DeleteRepository in the Repository Management section) but its full request-body parameter table was not independently fetched/verified during authoring. Probe hcloud CodeArtsArtifact CreateArtifactory --help and cross-check the CLI Examples tab before scripting a create call.
Out of scope for this service module: Uploading/downloading actual package files is normally done with the package manager (mvn, npm, pip, etc.) configured against the repository URL, not with hcloud; hcloud only manages the repository resource and metadata.
CodeArts TestPlan (service name: CloudTest, formerly CloudTest (this is still the current KooCLI/API Explorer service name))
Test plan, test case, and execution-tracking management.
Confirmed operations (full parameter table verified against the operation's own API Reference page):
Operation
HTTP method / path
Key parameters
CreateTestCaseInPlan
POST /v1/projects/{project_id}/plans/{plan_id}/testcases/batch-add
Operations that exist but were not independently parameter-verified: ShowPlans. Probe these with hcloud CloudTest <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-105): ShowPlans (listing test plans in a project) is confirmed to exist and to sit immediately before CreateTestCaseInPlan in the Test Plan Management section (GET .../plans, consistent with the sibling path .../plans/{plan_id}/testcases/batch-add), but its own query-parameter table was not independently fetched. In addition, KooCLI's exact CLI syntax for the testcase_id_list ARRAY body parameter of CreateTestCaseInPlan was not observed live; confirm the current array syntax with hcloud CloudTest CreateTestCaseInPlan --help or the operation's CLI Examples tab before scripting it, rather than guessing a bracket/comma format.
Out of scope for this service module: Test case authoring/design (manual or automated API test case content) is out of scope; this skill only lists plans and attaches already-existing test case IDs to a plan.
Operations that exist but were not independently parameter-verified: ListNewHosts, ShowDeployTaskDetail. Probe these with hcloud CodeArtsDeploy <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-106): The application/task-listing operation ListDeployTasks (GET /v2/{project_id}/tasks/list) is confirmed to exist and confirmed under the CodeArtsDeploy service name, but its own API Reference page explicitly states it 'will not be maintained after September 30, 2024' and directs callers to use ListAllApp instead; ListAllApp's parameters were not independently verified during authoring. Do not use ListDeployTasks for new automation; probe hcloud CodeArtsDeploy ListAllApp --help first, and treat deployment-task/application listing as needing live confirmation.
Out of scope for this service module: Application definition, deployment action orchestration (the steps inside a deployment task), and host onboarding into a cluster are configured from the CodeArts Deploy console; this skill creates host clusters, lists environments/hosts, and starts an already-configured deployment task.
GET /v5/{project_id}/api/pipelines/{pipeline_id}/pipeline-runs/detail
project_id (path), pipeline_id (path)
Operations that exist but were not independently parameter-verified: ListPipelines, ListExecutionsOverview. Probe these with hcloud CodeArtsPipeline <OPERATION> --help before using them in a write step.
Known gap (GAP-CODEARTS-OPS-107): ListPipelines is confirmed to exist (its JSON response shape was observed in the public API Reference example), but its query-parameter table (pagination fields such as offset/limit, and any filters) was not independently fetched during authoring. CreatePipelineNew's 'definition' body field is a large nested JSON structure (stages/jobs/steps) whose full schema was only partially observed via example payloads; do not hand-author a 'definition' value from guesswork — generate it from the console's 'Create Pipeline' / YAML editor, or from a previously exported pipeline, and pass it through unmodified.
Out of scope for this service module: Authoring a pipeline's stage/job graph from scratch via CLI is not covered; this skill lists, runs, and checks the status of pipelines whose definition already exists (created via console, YAML file, or CreatePipelineNew with a definition obtained elsewhere).
Capability gap handling
When a capability required for a CodeArts Repo/Check/Build/Artifact/TestPlan/Deploy/Pipeline operation is not available or not confirmed:
Document the gap with Gap ID, phase (service), and impact (see # Per-service operations and the known gaps below)
Classify the gap: critical path (blocks the requested action) or optional
Evaluate alternatives:
Can the step be performed via hcloud CLI after a live --help probe? → PROBE_HELP_BEFORE_USE (preferred)
Can it only be done manually in the console? → USE_CONSOLE_OR_PIPELINE_FOR_CREATE / USE_MANUAL_CONSOLE_FALLBACK
Is there a documented, non-deprecated replacement operation? → AVOID_DEPRECATED_OP_PROBE_REPLACEMENT
Can an existing MCP tool accomplish the task? → USE_EXISTING_TOOL (not applicable to any gap in this skill)
Is a new MCP needed? → CREATE_NEW_MCP (last resort; not applicable to any gap in this skill)
Never auto-activate a generated MCP or invent an undocumented command as a workaround
Update the affected service's status in this document's # Known limitations section if critical gaps remain
Known capability gaps (see the frontmatter's metadata block above, and # Per-service operations for each service's specific gap):
GAP-CODEARTS-OPS-101 (CodeArts Repo): AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, and DeleteRepository are confirmed to exist for CodeArtsRepo (listed by hcloud CodeArtsRepo --help / API Explorer), but their exact parameter sets were not independently checked against each operation's own API Reference page during authoring.
GAP-CODEARTS-OPS-102 (CodeArts Check): No operation to create or trigger-run a check task was found in the public CodeArts Check API Reference under the CodeCheck service; check tasks are created and started from the CodeArts Check console or from a CodeArts Pipeline job. This skill only lists tasks and reads their metrics/issues via hcloud; it does not create or start check tasks.
GAP-CODEARTS-OPS-103 (CodeArts Build): This is this skill's most significant capability gap, analogous to CreateProjectV4 in the companion CodeArts Req skill. The legacy build-task operations (CreateBuildJob, UpdateBuildJob, ListDeployTasks-style job listing) live under the older 'CodeCI' API namespace and several are explicitly marked deprecated or 'Out-of-date'/'Unavailable Soon' in their own API Reference pages. The current, non-deprecated CodeArtsBuild namespace only had ShowJobConfigDiff confirmed with a full parameter table at authoring time. No create-build-task or run/start-build-task operation could be confirmed under the current CodeArtsBuild service name. Before relying on any create/run/list build operation, this skill MUST probe hcloud CodeArtsBuild --help live and cross-check the operation's own API Explorer 'CLI Examples' tab; if the operation is missing, deprecated, or its parameters cannot be confirmed, use the CodeArts Build console, or drive the build through a CodeArts Pipeline job (see the pipeline module) instead of guessing a command.
GAP-CODEARTS-OPS-104 (CodeArts Artifact): CreateArtifactory (creating a non-Maven repository) is confirmed to exist by name (it appears as the documented 'next topic' after DeleteRepository in the Repository Management section) but its full request-body parameter table was not independently fetched/verified during authoring. Probe hcloud CodeArtsArtifact CreateArtifactory --help and cross-check the CLI Examples tab before scripting a create call.
GAP-CODEARTS-OPS-105 (CodeArts TestPlan): ShowPlans (listing test plans in a project) is confirmed to exist and to sit immediately before CreateTestCaseInPlan in the Test Plan Management section (GET .../plans, consistent with the sibling path .../plans/{plan_id}/testcases/batch-add), but its own query-parameter table was not independently fetched. In addition, KooCLI's exact CLI syntax for the testcase_id_list ARRAY body parameter of CreateTestCaseInPlan was not observed live; confirm the current array syntax with hcloud CloudTest CreateTestCaseInPlan --help or the operation's CLI Examples tab before scripting it, rather than guessing a bracket/comma format.
GAP-CODEARTS-OPS-106 (CodeArts Deploy): The application/task-listing operation ListDeployTasks (GET /v2/{project_id}/tasks/list) is confirmed to exist and confirmed under the CodeArtsDeploy service name, but its own API Reference page explicitly states it 'will not be maintained after September 30, 2024' and directs callers to use ListAllApp instead; ListAllApp's parameters were not independently verified during authoring. Do not use ListDeployTasks for new automation; probe hcloud CodeArtsDeploy ListAllApp --help first, and treat deployment-task/application listing as needing live confirmation.
GAP-CODEARTS-OPS-107 (CodeArts Pipeline): ListPipelines is confirmed to exist (its JSON response shape was observed in the public API Reference example), but its query-parameter table (pagination fields such as offset/limit, and any filters) was not independently fetched during authoring. CreatePipelineNew's 'definition' body field is a large nested JSON structure (stages/jobs/steps) whose full schema was only partially observed via example payloads; do not hand-author a 'definition' value from guesswork — generate it from the console's 'Create Pipeline' / YAML editor, or from a previously exported pipeline, and pass it through unmodified.
GAP-CODEARTS-OPS-000: No dedicated MCP exists for any of the seven services in this skill's scope; all operations via hcloud CLI. [VERIFIED_FROM_PUBLIC_API_DOCS]
GAP-CODEARTS-OPS-999: This skill has not been executed against a live hcloud CLI or live tenant for any of the seven services; all CLI syntax is derived from each operation's own public API Reference page, not from --help output captured live. [NOT_LIVE_TESTED]
Install KooCLI per # Prerequisites above; add /usr/local/bin to PATH
Authentication failure
hcloud profile misconfigured
hcloud configure show --cli-profile=default
Re-run hcloud configure init
Region rejected
Region not valid for CodeArts in this tenant
Try a region already confirmed for other CodeArts services in the tenant
Use a confirmed CodeArts region
ListProjectsV4 --search= returns no match
Project not yet created
N/A (out of this skill's scope)
Use the companion huawei-codearts-project-design skill first
hcloud CodeArtsRepo --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CodeCheck --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CodeArtsBuild --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CodeArtsArtifact --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CloudTest --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CodeArtsDeploy --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
hcloud CodeArtsPipeline --help missing an expected operation
Older KooCLI/API Explorer metadata, or the operation genuinely does not exist under this service
Compare against that service's confirmed-operations table in # Per-service operations above
Use the console (or, for Build, a CodeArts Pipeline job) instead of inventing a substitute
A create/write operation is rejected (403/permission)
Tenant lacks the specific CodeArts permission for that service/action
Error message from the call
Request the specific permission from an administrator
CodeArtsBuild create/run cannot be confirmed at all
Known gap GAP-CODEARTS-OPS-103
hcloud CodeArtsBuild --help
Use the CodeArts Build console, or run the build via an existing CodeArts Pipeline job
Region mismatch between plan and call
--cli-region omitted or wrong on a later command
Compare command flags across steps
Ensure every command for the same operation uses the same --cli-region
Failure handling
Authentication failure: verify hcloud config, region, IAM permissions. Do not retry with different credentials without operator confirmation.
Project not resolved: stop; this skill does not create projects.
Service unreachable / operation missing: cross-check against the target service's confirmed-operations table before assuming a transient error; if genuinely missing, use the console/Pipeline fallback, never an invented command.
Write operation rejected for a permission reason: report; do not retry with different credentials without operator confirmation.
Write operation rejected for any other reason: STOP, preserve evidence, report to approval owner; do not retry with a different, invented command.
Verification failure: report; do not delete, stop, or recreate the resource automatically.
Recovery procedure
If failure during discovery (Steps 2-3): no resource created/modified. Fix authentication/region/service issue and retry from Step 2.
If failure during the target service's module (Step 4), discover/verify sub-actions: re-run discovery; no resource was created, retry once the root cause is fixed.
If failure during a create/write sub-action: check the error. If authorization-related, request the specific permission (or, for Build, use the console/Pipeline fallback) with a new approval request. If a parameter/name error, correct and retry.
If failure during verification: the resource may be in an inconsistent state. Do not delete/stop/recreate it automatically; report and await a decision.
Never expand recovery into a different service's module, or into CodeArts Req project data, to compensate for a failure in the target service.
Rollback
Most operations in this skill are read-only or additive; a symmetric "undo" API does not exist for every action. Never delete or stop a resource automatically after a downstream failure — report and let the approval owner decide. Only use a Delete/Stop-style operation after confirming (via hcloud <SERVICE_NAME> --help) that it exists for that service, and only with explicit approval.
Listed for CodeArtsArtifact but not independently parameter-verified; probe --help first.
CodeArts TestPlan: no remove-test-case-from-plan operation was confirmed; report to the approval owner and remove cases from the console instead.
CodeArts Deploy: a deployment started with StartDeployTask cannot be rolled back through this skill; the correction is a new, separately approved deployment of a previous version.
CodeArts Pipeline: a completed run cannot be undone. To stop an in-progress run, first probe hcloud CodeArtsPipeline --help to confirm whether a stop/cancel operation exists — do not assume it exists or guess its name.
Do NOT delete or stop any resource automatically after a failure in any phase. Do NOT invent a Delete/Stop/Cancel command not confirmed to exist for that specific service. Do NOT treat a rollback in one service as a substitute for fixing the root cause in another. Do NOT touch CodeArts Req project data as part of any rollback in this skill.
Evidence and traceability
All hcloud CLI commands logged with timestamps
project_id and every service-specific resource identifier recorded in artifacts
Approval decisions recorded with approver identity and timestamp
Per-service capability probe results recorded and reusable across runs against the same tenant/CLI version (re-probe if either changes, and always re-probe any operation still marked unconfirmed for that service)
No secrets in any artifact
Known limitations
No dedicated MCP exists for any of the seven services in this skill's scope [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Build's create/run capability is unresolved under the current CodeArtsBuild service name; only configuration-diff inspection (ShowJobConfigDiff) is confirmed [NOT_LIVE_TESTED] [GAP-CODEARTS-OPS-103]
CodeArts Repo: AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, and DeleteRepository are confirmed to exist for CodeArtsRepo (listed by hcloud CodeArtsRepo --help / API Explorer), but their exact parameter sets were not independently checked against each operation's own API Reference page during authoring.
CodeArts Check: No operation to create or trigger-run a check task was found in the public CodeArts Check API Reference under the CodeCheck service; check tasks are created and started from the CodeArts Check console or from a CodeArts Pipeline job. This skill only lists tasks and reads their metrics/issues via hcloud; it does not create or start check tasks.
CodeArts Artifact: CreateArtifactory (creating a non-Maven repository) is confirmed to exist by name (it appears as the documented 'next topic' after DeleteRepository in the Repository Management section) but its full request-body parameter table was not independently fetched/verified during authoring. Probe hcloud CodeArtsArtifact CreateArtifactory --help and cross-check the CLI Examples tab before scripting a create call.
CodeArts TestPlan: ShowPlans (listing test plans in a project) is confirmed to exist and to sit immediately before CreateTestCaseInPlan in the Test Plan Management section (GET .../plans, consistent with the sibling path .../plans/{plan_id}/testcases/batch-add), but its own query-parameter table was not independently fetched. In addition, KooCLI's exact CLI syntax for the testcase_id_list ARRAY body parameter of CreateTestCaseInPlan was not observed live; confirm the current array syntax with hcloud CloudTest CreateTestCaseInPlan --help or the operation's CLI Examples tab before scripting it, rather than guessing a bracket/comma format.
CodeArts Deploy: The application/task-listing operation ListDeployTasks (GET /v2/{project_id}/tasks/list) is confirmed to exist and confirmed under the CodeArtsDeploy service name, but its own API Reference page explicitly states it 'will not be maintained after September 30, 2024' and directs callers to use ListAllApp instead; ListAllApp's parameters were not independently verified during authoring. Do not use ListDeployTasks for new automation; probe hcloud CodeArtsDeploy ListAllApp --help first, and treat deployment-task/application listing as needing live confirmation.
CodeArts Pipeline: ListPipelines is confirmed to exist (its JSON response shape was observed in the public API Reference example), but its query-parameter table (pagination fields such as offset/limit, and any filters) was not independently fetched during authoring. CreatePipelineNew's 'definition' body field is a large nested JSON structure (stages/jobs/steps) whose full schema was only partially observed via example payloads; do not hand-author a 'definition' value from guesswork — generate it from the console's 'Create Pipeline' / YAML editor, or from a previously exported pipeline, and pass it through unmodified.
This skill's scope explicitly excludes CodeArts Req / ProjectMan project planning and creation
No live hcloud CLI or tenant test was performed during authoring for any of the seven services
Status justification
Status: READY_WITH_WARNINGS
Evidence:
CodeArts Repo (CodeArtsRepo): CreateRepository, ListUserAllRepositories, ShowRepository confirmed with a full parameter table from the operation's own public API Reference page; AddSshKey, ListSshKeys, ListRepoMembers, AddRepoMembers, CreateNewBranch, ListBranchesByRepositoryId, DeleteRepository listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Check (CodeCheck): ShowTaskListByProjectIdV2, ShowTaskCmetrics, ShowTaskDetailV2, ShowTaskDefectsV2 confirmed with a full parameter table from the operation's own public API Reference page; StopTaskByIdV2 listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Build (CodeArtsBuild): ShowJobConfigDiff confirmed with a full parameter table from the operation's own public API Reference page; no further operations listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Artifact (CodeArtsArtifact): ListAllRepositories, ShowMavenInfo, ShowFileTree confirmed with a full parameter table from the operation's own public API Reference page; CreateArtifactory, DeleteRepository, ListChildProxyRepositoriesList, ListArtifactoryComponent listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts TestPlan (CloudTest): CreateTestCaseInPlan confirmed with a full parameter table from the operation's own public API Reference page; ShowPlans listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Deploy (CodeArtsDeploy): CreateHostCluster, ListEnvironments, ListEnvironmentHosts, StartDeployTask confirmed with a full parameter table from the operation's own public API Reference page; ListNewHosts, ShowDeployTaskDetail listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
CodeArts Pipeline (CodeArtsPipeline): CreatePipelineNew, RunPipeline, ShowPipelineRunDetail confirmed with a full parameter table from the operation's own public API Reference page; ListPipelines, ListExecutionsOverview listed/known to exist but not independently parameter-verified. [VERIFIED_FROM_PUBLIC_API_DOCS]
No dedicated MCP exists for any of the seven services [VERIFIED_FROM_PUBLIC_API_DOCS]
All write operations require explicit approval [INFERRED]
No cloud-side or CLI-side live test was executed for any of the seven services; this authoring environment had web-search/fetch access to public documentation only, not a live hcloud CLI install or Huawei Cloud credentials [NOT_LIVE_TESTED]
Because of the above, this skill mandates a live per-operation probe (hcloud <SERVICE_NAME> <OPERATION> --help) before any workflow instance relies on an operation outside the confirmed-operations table for its target service, and documents an explicit fallback (console or, for Build, CodeArts Pipeline) for the one service (CodeArts Build) where no create/run operation could be confirmed at all
