hotpath-init

name	hotpath_init
description	Configure hotpath profiling in a Rust project. Adds the hotpath dependency with feature-gated setup, instruments main with hotpath::main, functions with measure/measure_all, and wraps channels, mutexes, rw_locks, streams and futures with hotpath macros. Use when the user wants to add or set up hotpath profiling in a crate.
allowed-tools	Bash, Read, Edit, Write, Glob, Grep

Initialize hotpath Profiling

Set up hotpath profiling in the current Rust project. The setup is fully feature-gated: zero compile-time and runtime overhead unless the hotpath feature is explicitly enabled. All macros are noops when the feature is off, so no cfg_attr wrapping is needed.

Steps

1. Inspect the project

• Find the binary crate(s) and the main function. If there is no main you control (e.g. a library or a test harness), use the HotpathGuardBuilder API instead of #[hotpath::main] (see step 3).
• Detect the async runtime (tokio, smol, none) and which instrumentable primitives the code uses: channels (tokio::sync::mpsc/oneshot, std::sync::mpsc, crossbeam_channel, flume, async-channel, futures_channel), Mutex and RwLock (std/parking_lot/tokio/async-lock), futures streams, sqlx, diesel.

2. Add the dependency and feature passthrough

In the target crate's Cargo.toml:

[dependencies]
hotpath = "0.21"

[features]
hotpath = ["hotpath/hotpath"]
hotpath-alloc = ["hotpath/hotpath-alloc"]

Enable extra hotpath cargo features on the dependency based on what the project uses:

• tokio - for tokio::sync channel instrumentation and hotpath::tokio_runtime!() metrics: hotpath = { version = "0.21", features = ["tokio"] }
• crossbeam - for crossbeam_channel instrumentation
• futures - for futures_channel instrumentation
• flume - for flume channel instrumentation
• async-channel - for async-channel instrumentation
• parking_lot - for parking_lot RwLock/Mutex instrumentation
• async-lock - for async-lock RwLock/Mutex instrumentation
• sqlx - for SQL query profiling via hotpath::sqlx_tracing_layer()
• diesel - for SQL query profiling via hotpath::instrument_diesel_sql()

If the crate already has a [features] section, merge the entries.

3. Instrument main

#[hotpath::main] initializes the profiler and prints the report when main exits. With tokio, #[tokio::main] must come FIRST (above):

#[tokio::main]
#[hotpath::main]
async fn main() {
    // ...
}

Optional parameters: #[hotpath::main(percentiles = [50, 95, 99.9], format = "json", limit = 20)]. Defaults are fine for a first setup; don't add parameters unless asked.

If attribute placement on main is not possible, build a guard programmatically (report prints when the guard drops):

let _hotpath = hotpath::HotpathGuardBuilder::new("main")
    .build();

4. Instrument functions

• Prefer #[hotpath::measure_all] on inline modules and impl blocks - it instruments every function inside. Exclude noisy or trivial functions with #[hotpath::skip].
• Use #[hotpath::measure] on individual functions, both sync and async.
• Useful parameters: log = true (log return values, requires Debug), label = "name" (custom identifier, duplicates panic at runtime).
• hotpath::measure_block!("label", { ... }) for ad-hoc code blocks.

Start with hot paths: request handlers, worker loops, parsing/serialization, IO-heavy functions. Don't instrument one-line getters.

Async functions are measured runtime-agnostically, and under hotpath-alloc their allocations are tracked too (per-poll attribution via an async bridge), so no special handling is needed.

Don't try to instrument everything, use up to ~5 hotpath::measure_all annotations and up to 30 hotpath::measure. Goal of the initial setup is not to measure all functions, but to get the initial working instrumentation in place.

5. Wrap data-flow primitives

Wrap at the creation site; all wrappers accept optional label = "name" and (where noted) log = true:

// Channels (tokio mpsc/oneshot, std mpsc, crossbeam, flume, async-channel, futures_channel)
let (tx, rx) = hotpath::channel!(mpsc::channel::<String>(100), label = "jobs", log = true);
// tokio oneshot + futures_channel need proxy mode (compile error otherwise);
// bounded std sync_channel and futures_channel mpsc also need capacity = N (must match):
let (tx, rx) = hotpath::channel!(mpsc::channel::<String>(10), proxy = true, capacity = 10);

// Locks (wait time + held time)
let mutex = hotpath::mutex!(std::sync::Mutex::new(state), label = "state");
let lock = hotpath::rw_lock!(tokio::sync::RwLock::new(config), label = "config");

// Streams and futures
let s = hotpath::stream!(stream::iter(1..=10), label = "events");
let result = hotpath::future!(some_async_operation(), label = "fetch").await;

Wrapped locks/channels are drop-in: the wrappers expose the same API, so call sites don't change. If passing them across function boundaries requires type-signature changes, note that to the user rather than rewriting half the codebase silently.

Wrapper macros return types prefixed with hotpath::wrap, make sure to update type signatures where needed. Explain to user that these types are no-op unless hotpath feature is enabled.

Apply log = true only if Debug is already implemented.

6. Optional extras (only when relevant)

• Tokio runtime metrics: call hotpath::tokio_runtime!(); once at startup (requires tokio feature).
• SQL profiling (sqlx 0.8/0.9): add the layer to the tracing subscriber once - tracing_subscriber::registry().with(hotpath::sqlx_tracing_layer()).init(); (requires sqlx feature). Don't filter out the sqlx::query target.
• SQL profiling (diesel): call hotpath::instrument_diesel_sql(); once at startup (requires diesel feature).

7. Verify

cargo check                       # feature off: must still compile, zero overhead
cargo check --features hotpath    # feature on
cargo run --features hotpath      # prints report on exit

Optionally verify alloc mode: cargo run --features 'hotpath,hotpath-alloc'.

Report what was instrumented and mention next steps: the live TUI (cargo install hotpath --features tui, then hotpath console while the app runs - metrics server listens on port 6770 by default), HOTPATH_REPORT=all for all report sections, and HOTPATH_OUTPUT_FORMAT=json for machine-readable output.

Also explain to the user that hotpath is safe to keep as a regular (non-optional) dependency: unless the hotpath feature is enabled, it compiles zero third-party dependencies (only the hotpath crates themselves), and all macros expand to noops, so there is no compile-time bloat and no runtime overhead.

Rules

• Never enable the hotpath feature by default (default = []); profiling must stay opt-in.
• Keep edits minimal: dependency, main, and a sensible starting set of instrumented functions/primitives. Expand coverage only when the user asks.