stemstudio-physics

name	stemstudio-physics
description	Physics enable/disable/configuration workflows for Studio 3D objects. Use for collision shape selection, body type setup, material tuning, and batch physics changes.

StemStudio Physics

Use this skill for object-level physics configuration and verification.

Start Here

If you know the genre, look up the row in ~/.claude/stemstudio-docs/physics-system.md "Physics Defaults by Genre" before configuring objects — it tells you the right gravity, body types, shapes, and presets in one place. Then inspect the target object via stemstudio-scene and choose one of:

python scripts/set_physics_engine.py --type ammo --gravity -9.81
python scripts/enable_physics.py --target "Cube"
python scripts/disable_physics.py --target "Sphere"
python scripts/set_physics.py --target "Ball" --config '{"enabled":true,"shape":"sphere","mass":5.0,"ctype":"Dynamic","bounciness_preset":"Rubber"}'

Casing matters:

• ctype: PascalCase ("Static" / "Dynamic" / "Kinematic") — runtime requires this; lowercase is silently broken.
• shape: lowercase ("box" / "sphere" / "capsule" / "convexHull" / "concaveHull").
• bounciness_preset / collision_material: label as in the preset table ("Rubber", "Slippery Ground" with the space, "Custom").
• bodyType is NOT a field — use ctype. bodyType is silently ignored.

Use bounciness_preset instead of hand-tuning: setting one preset fills restitution/friction/contactStiffness/contactDamping from the engine-tuned table. See ~/.claude/stemstudio-docs/physics-system.md "Material & Bounciness Presets".

Critical Workflows

Set scene engine and gravity

Engine choice is scene-level — every physics-enabled object in the scene shares the same engine. Set it before configuring object physics. Takes effect at next scene load; existing bodies keep running under whichever engine was active when the scene loaded.

python scripts/set_physics_engine.py --type ammo                  # default; widest feature coverage
python scripts/set_physics_engine.py --type rapier --gravity -9.81  # no vehicle support
python scripts/set_physics_engine.py --type jolt --gravity -15
python scripts/set_physics_engine.py --type physx

Engine	Status	Notes
ammo	Default, most mature	Widest feature coverage (vehicles, character controller, joints)
rapier	Stable	No vehicle support — addVehicleObject is a runtime error on Rapier
jolt	New (PR #4538)	Fast; verify feature parity for the specific scene
physx	New (PR #4538)	Heaviest WASM payload; verify feature parity

Gravity is on the Y axis; negative = down (Earth-like is -9.81). Omit --gravity to leave the scene's current value unchanged.

Coordinate convention for forces, impulses, and velocities — Three.js right-handed: +X right, +Y up, -Z forward. World-space vectors passed to setLinearVelocity, applyCentralImpulse, applyImpulseToPlayer, and movePlayerObject follow this convention: positive Y lifts, negative Y is "down with gravity", and a unit (0, 0, -1) impulse pushes an object forward in world space. For object-local forward, multiply (0, 0, -1) by the object's world quaternion. See ~/.claude/stemstudio-docs/architecture.md "Coordinate Convention".

Enable or disable physics

python scripts/enable_physics.py --target "Crate"
python scripts/disable_physics.py --target "GhostTrigger"

Configure a single object

# Bouncy ball — preset fills restitution/friction/contactStiffness/contactDamping
python scripts/set_physics.py --target "Ball" --config '{"enabled":true,"shape":"sphere","mass":5,"ctype":"Dynamic","bounciness_preset":"Rubber","collision_material":"Rubber"}'

# Static level geometry
python scripts/set_physics.py --target "Ground" --config '{"enabled":true,"shape":"concaveHull","mass":0,"ctype":"Static","bounciness_preset":"Concrete","collision_material":"Concrete"}'

# Player capsule with locked rotation
python scripts/set_physics.py --target "Player" --config '{"enabled":true,"shape":"capsule","mass":1,"ctype":"Dynamic","rotationLock":{"x":true,"y":false,"z":true}}'

Batch operations

ALWAYS use batch scripts for 2+ objects:

python scripts/batch_enable_physics.py --targets "Box1" "Box2" "Box3"
python scripts/batch_disable_physics.py --targets "Temp1" "Temp2"
python scripts/batch_set_physics.py --targets "Enemy1" "Enemy2" --config '{"ctype":"Dynamic","mass":5,"friction":0.5}'

Use --operations when each object needs different config.

Adding Objects with Physics via Behaviors

Use these game methods inside behavior code to programmatically create, configure, and remove objects with physics:

interface PhysicsConfig {
    // required
    enabled: boolean;
    // required
    shape: "btBoxShape" | "btSphereShape" | "btConcaveHullShape" | "btConvexHullShape" | "btCapsuleShape";

    /** The collision shape's local position relative to the object */
    anchorOffset?: { x: number; y: number; z: number };
    /** The collision shape's scale, relative to the object */
    anchorScale?: { x: number; y: number; z: number };
    /** User-supplied shape offset that is applied to anchorOffset */
    userShapeOffset?: { x: number; y: number; z: number };
    /** User-supplied shape scale that is applied to anchorScale */
    userShapeScale?: { x: number; y: number; z: number };

    // required for dynamic objects (ctype="Dynamic")
    mass: number;
    inertia: { x: number; y: number; z: number };

    restitution: number;      // 0 = no bounce, 1 = perfectly elastic
    friction: number;         // 0 = no friction, 1 = maximum friction
    rollingFriction: number;  // 0 = no rolling friction, 1 = maximum rolling friction
    spinningFriction: number; // 0 = no spinning friction, 1 = maximum spinning friction
    contactStiffness: number; // 0 = no contact stiffness, 1 = maximum contact stiffness
    contactDamping: number;   // 0 = no contact damping, 1 = maximum contact damping

    /**
     * Required — collision type
     * - "Dynamic": Fully simulated by physics engine (forces, gravity, collisions). For debris, balls, active characters.
     * - "Static": Immovable, does not react to forces. For floors, walls, scenery. Performance-efficient.
     * - "Kinematic": Moves via script/animation, behaves as infinite mass. Does not fall under gravity but pushes dynamic objects. For moving platforms, elevators.
     */
    ctype: "Static" | "Dynamic" | "Kinematic";

    rotationLock?: { x: boolean; y: boolean; z: boolean };

    climbable: boolean;

    // required
    type: "rigidBody";
}

/**
 * Sets the physics configuration for an object.
 * Call this before addObject() to configure physics before the object enters the scene.
 */
game.setPhysicsConfig(object: Object3D, config: PhysicsConfig): void;

/**
 * Adds an object to the scene and enables physics for it.
 * @param parent - Optional parent object. Defaults to the scene root.
 */
game.addObject(object: Object3D, parent?: Object3D): void;

/**
 * Removes an object from the scene, including its behaviors and physics.
 * Recursively removes behaviors and physics for all children.
 */
game.removeObject(object: THREE.Object3D): void;

Example: Spawning a physics-enabled object from a behavior

// Inside a behavior method (e.g., onCollision, update, etc.)
const box = new THREE.Mesh(
    new THREE.BoxGeometry(1, 1, 1),
    new THREE.MeshStandardMaterial({ color: 0xff4400 })
);
box.position.set(0, 5, 0);

game.setPhysicsConfig(box, {
    enabled: true,
    type: "rigidBody",
    shape: "btBoxShape",
    ctype: "Dynamic",
    mass: 1,
    inertia: { x: 0, y: 0, z: 0 },
    restitution: 0.3,
    friction: 0.6,
    rollingFriction: 0.1,
    spinningFriction: 0.1,
    contactStiffness: 100000,
    contactDamping: 100,
    climbable: false,
});

game.addObject(box); // adds to scene root with physics active

Example: Removing an object

// Remove a previously added object and clean up its physics/behaviors
game.removeObject(targetObject);

Physics API for Behaviors

These methods are available via game.physics inside behavior code:

// Velocity
game.physics.setLinearVelocity(uuid, velocity);
game.physics.setAngularVelocity(uuid, velocity);

// Forces and impulses
game.physics.applyCentralImpulse(uuid, impulse);
game.physics.applyImpulseToRigidBody(uuid, impulse, relativePosition?);

// Player helpers
game.physics.addPlayerObject(uuid, useController, options?);
game.physics.movePlayerObject(uuid, walkDirection, jump);
game.physics.setPlayerPosition(uuid, position);
game.physics.applyImpulseToPlayer(uuid, impulse);

// Explicitly add or remove object from physics simulation
game.physics.add(object);
game.physics.remove(uuid);

Routing Guidance

Use this skill for:

• body type selection
• collision shape choice
• mass, friction, restitution, and damping
• simple physics presets

Do not use this skill for:

• runtime physics API coding in behaviors without also loading stemstudio-game-engine
• scene building unrelated to physics

Verification

After configuration, verify through scene/object inspection and, when needed, play-mode testing.

Do not assume a physics change worked just because the command returned successfully.

When To Read More

• Need body types, collision shapes, or physics semantics: ~/.claude/stemstudio-docs/physics-system.md
• Need exact enum names or type contracts: ~/.claude/stemstudio-types/stem-types.d.ts
• Need exact registry names referenced by surrounding systems: ~/.claude/stemstudio-types/stem-events-registry.json

Common Mistakes

• configuring many objects one-by-one instead of batching
• using the wrong body type for the gameplay need
• treating physics config as behavior logic
• skipping verification after a config change
• using bodyType instead of ctype — bodyType is silently ignored
• using lowercase ctype ("static" / "dynamic") — runtime requires PascalCase per CollisionType enum
• using uppercase shape strings ("BOX" / "SPHERE") — runtime requires lowercase friendly names or the internal bt*Shape form
• hand-tuning restitution / friction / contactStiffness / contactDamping when bounciness_preset would fill them from the engine-tuned table
• skipping the genre-defaults lookup and inventing values per object

See Also

• stemstudio-scene
• stemstudio-objects
• stemstudio-game-engine
• stemstudio-behaviors