pp-fellow-stagg-ekg

name	pp-fellow-stagg-ekg
description	Control a Fellow Stagg EKG kettle over its local HTTP CLI. Trigger phrases: `start the kettle`, `set the kettle to 95`, `show kettle status`, `turn the kettle off`, `use fellow stagg ekg`, `run fellow stagg ekg`.
author	Erik Rogne
license	Apache-2.0
argument-hint	<command> [args] | install cli
allowed-tools	Read Bash
metadata	{"openclaw":{"requires":{"bins":["fellow-stagg-ekg-pp-cli"]}}}

Fellow Stagg EKG - Printing Press CLI

Prerequisites: Install the CLI

This skill drives the fellow-stagg-ekg-pp-cli binary.

Install via the Printing Press installer:

npx -y @mvanhorn/printing-press-library install fellow-stagg-ekg --cli-only

If npx is unavailable, fall back to Go:

go install github.com/mvanhorn/printing-press-library/library/devices/fellow-stagg-ekg/cmd/fellow-stagg-ekg-pp-cli@latest

When to Use This CLI

Use this CLI when you need to read or control a Fellow Stagg EKG kettle from the terminal: checking status, switching units, starting heat, or sending a raw command while debugging the kettle's local HTTP interface.

Command Reference

• fellow-stagg-ekg-pp-cli status - Show state, settings, and firmware info.
• fellow-stagg-ekg-pp-cli state - Fetch the kettle state.
• fellow-stagg-ekg-pp-cli settings - Fetch the kettle settings.
• fellow-stagg-ekg-pp-cli clock - Fetch the kettle clock.
• fellow-stagg-ekg-pp-cli info - Fetch firmware info.
• fellow-stagg-ekg-pp-cli heat - Set a target temperature and start heating.
• fellow-stagg-ekg-pp-cli off - Turn the kettle off.
• fellow-stagg-ekg-pp-cli set-temp - Set the target temperature.
• fellow-stagg-ekg-pp-cli set-setting - Send a direct setting update.
• fellow-stagg-ekg-pp-cli units - Switch the display units.
• fellow-stagg-ekg-pp-cli button - Press or release a button.
• fellow-stagg-ekg-pp-cli dial - Rotate the dial.
• fellow-stagg-ekg-pp-cli beep - Run the buzzer.
• fellow-stagg-ekg-pp-cli raw - Send a raw kettle command.

Recipes

# Read the kettle status.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli status

# Heat to a target temperature, then turn heat on.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli heat --temp 95.5

# Switch the display to Fahrenheit.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli units f