pp-fellow-stagg-ekg
Control a Fellow Stagg EKG kettle over its local HTTP CLI. Trigger phrases: `start the kettle`, `set the kettle to 95`, `show kettle status`, `turn the kettle off`, `use fellow stagg ekg`, `run fellow stagg ekg`.
Informações da origem
- Repositório
- mvanhorn/printing-press-library
- Última atividade na origem
- 8 de julho de 2026 às 18:21
- Idioma detectado do SKILL.md
- inglês
- Estrelas
- 1.918
- Forks
- 572
Opções de instalação
Por padrão, está selecionado o prompt que primeiro revisa a origem. Você pode mudar para um comando direto ou baixar uma cópia local.
Revise os arquivos de origem
Leia o SKILL.md e os arquivos complementares exibidos pelo SkillsMP antes de decidir se vai instalar.
Explorador de arquivos
24 arquivosExibindo SKILL.md
SKILL.md
Instruções da origem · Visualização somente leitura- name
- pp-fellow-stagg-ekg
- description
- Control a Fellow Stagg EKG kettle over its local HTTP CLI. Trigger phrases: `start the kettle`, `set the kettle to 95`, `show kettle status`, `turn the kettle off`, `use fellow stagg ekg`, `run fellow stagg ekg`.
- author
- Erik Rogne
- license
- Apache-2.0
- argument-hint
- <command> [args] | install cli
- allowed-tools
- Read Bash
- metadata
- {"openclaw":{"requires":{"bins":"[Truncated]"}}}
# Fellow Stagg EKG - Printing Press CLI
## Prerequisites: Install the CLI
This skill drives the `fellow-stagg-ekg-pp-cli` binary.
Install via the Printing Press installer:
```bash
npx -y @mvanhorn/printing-press-library install fellow-stagg-ekg --cli-only
```
If `npx` is unavailable, fall back to Go:
```bash
go install github.com/mvanhorn/printing-press-library/library/devices/fellow-stagg-ekg/cmd/fellow-stagg-ekg-pp-cli@latest
```
## When to Use This CLI
Use this CLI when you need to read or control a Fellow Stagg EKG kettle from the terminal: checking status, switching units, starting heat, or sending a raw command while debugging the kettle's local HTTP interface.
## Command Reference
- `fellow-stagg-ekg-pp-cli status` - Show state, settings, and firmware info.
- `fellow-stagg-ekg-pp-cli state` - Fetch the kettle state.
- `fellow-stagg-ekg-pp-cli settings` - Fetch the kettle settings.
- `fellow-stagg-ekg-pp-cli clock` - Fetch the kettle clock.
- `fellow-stagg-ekg-pp-cli info` - Fetch firmware info.
- `fellow-stagg-ekg-pp-cli heat` - Set a target temperature and start heating.
- `fellow-stagg-ekg-pp-cli off` - Turn the kettle off.
- `fellow-stagg-ekg-pp-cli set-temp` - Set the target temperature.
- `fellow-stagg-ekg-pp-cli set-setting` - Send a direct setting update.
- `fellow-stagg-ekg-pp-cli units` - Switch the display units.
- `fellow-stagg-ekg-pp-cli button` - Press or release a button.
- `fellow-stagg-ekg-pp-cli dial` - Rotate the dial.
- `fellow-stagg-ekg-pp-cli beep` - Run the buzzer.
- `fellow-stagg-ekg-pp-cli raw` - Send a raw kettle command.
## Recipes
```bash
# Read the kettle status.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli status
```
```bash
# Heat to a target temperature, then turn heat on.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli heat --temp 95.5
```
```bash
# Switch the display to Fahrenheit.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli units f
```
Ver no GitHub