pp-fellow-stagg-ekg
Control a Fellow Stagg EKG kettle over its local HTTP CLI. Trigger phrases: `start the kettle`, `set the kettle to 95`, `show kettle status`, `turn the kettle off`, `use fellow stagg ekg`, `run fellow stagg ekg`.
Quellinformationen
- Repository
- mvanhorn/printing-press-library
- Letzte Quellaktivität
- 8. Juli 2026 um 18:21
- Erkannte Sprache von SKILL.md
- Englisch
- Sterne
- 1.918
- Forks
- 572
Installationsoptionen
Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Datei-Explorer
24 DateienSKILL.md wird angezeigt
SKILL.md
Quellanweisungen · Schreibgeschützte Vorschau- name
- pp-fellow-stagg-ekg
- description
- Control a Fellow Stagg EKG kettle over its local HTTP CLI. Trigger phrases: `start the kettle`, `set the kettle to 95`, `show kettle status`, `turn the kettle off`, `use fellow stagg ekg`, `run fellow stagg ekg`.
- author
- Erik Rogne
- license
- Apache-2.0
- argument-hint
- <command> [args] | install cli
- allowed-tools
- Read Bash
- metadata
- {"openclaw":{"requires":{"bins":"[Truncated]"}}}
# Fellow Stagg EKG - Printing Press CLI
## Prerequisites: Install the CLI
This skill drives the `fellow-stagg-ekg-pp-cli` binary.
Install via the Printing Press installer:
```bash
npx -y @mvanhorn/printing-press-library install fellow-stagg-ekg --cli-only
```
If `npx` is unavailable, fall back to Go:
```bash
go install github.com/mvanhorn/printing-press-library/library/devices/fellow-stagg-ekg/cmd/fellow-stagg-ekg-pp-cli@latest
```
## When to Use This CLI
Use this CLI when you need to read or control a Fellow Stagg EKG kettle from the terminal: checking status, switching units, starting heat, or sending a raw command while debugging the kettle's local HTTP interface.
## Command Reference
- `fellow-stagg-ekg-pp-cli status` - Show state, settings, and firmware info.
- `fellow-stagg-ekg-pp-cli state` - Fetch the kettle state.
- `fellow-stagg-ekg-pp-cli settings` - Fetch the kettle settings.
- `fellow-stagg-ekg-pp-cli clock` - Fetch the kettle clock.
- `fellow-stagg-ekg-pp-cli info` - Fetch firmware info.
- `fellow-stagg-ekg-pp-cli heat` - Set a target temperature and start heating.
- `fellow-stagg-ekg-pp-cli off` - Turn the kettle off.
- `fellow-stagg-ekg-pp-cli set-temp` - Set the target temperature.
- `fellow-stagg-ekg-pp-cli set-setting` - Send a direct setting update.
- `fellow-stagg-ekg-pp-cli units` - Switch the display units.
- `fellow-stagg-ekg-pp-cli button` - Press or release a button.
- `fellow-stagg-ekg-pp-cli dial` - Rotate the dial.
- `fellow-stagg-ekg-pp-cli beep` - Run the buzzer.
- `fellow-stagg-ekg-pp-cli raw` - Send a raw kettle command.
## Recipes
```bash
# Read the kettle status.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli status
```
```bash
# Heat to a target temperature, then turn heat on.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli heat --temp 95.5
```
```bash
# Switch the display to Fahrenheit.
FELLOW_STAGG_HOST=192.168.1.86 fellow-stagg-ekg-pp-cli units f
```
Auf GitHub ansehen