菜单
Fetch and summarise the datasheet for a part (or all parts in a project's BOM). Pulls the official PDF when locatable, extracts pinout, electrical characteristics, and typical application notes, and writes a per-part reference into the project directory.
默认使用会先检查来源的 Prompt；你也可以切换为直接命令，或下载本地副本。
决定是否安装前，请先阅读 SKILL.md，以及 SkillsMP 当前展示的配套文件。
用 Codex 或 Claude 帮你安装 复制这段 Prompt，粘贴到 Codex、Claude 或其他助手里，让它检查 Skill 页面并帮你完成安装。
直接命令不会经过审查 Prompt；运行前请先检查来源。
npx skills add https://github.com/danielrosehill/Claude-Hardware-Spec-Assembly-Plugin --skill datasheet-lookup命令会保持在同一行。复制前请横向滚动并检查完整内容。
想先保存到本地？可下载 SkillsMP 当前能够提供的文件。
Build a structured hardware specification and BOM for a project. Walks the user through goals, constraints, and functional requirements, then produces a markdown spec plus a structured BOM (parts, quantities, rationale) saved into the project directory.
Estimate the total cost of a project's BOM. Reads bom.json from a project, applies typical price ranges per vendor (informed by the user's preferred suppliers and location), and produces low/mid/high cost envelopes plus shipping considerations.
Produce a PCB design starting point from a project's BOM and wiring spec — schematic netlist, board stack-up and layout guidance, and ESP32-specific rules (antenna keep-out, strapping pins, decoupling). Output is KiCad/EasyEDA-ready design input, not finished Gerbers.
基于 SOC 职业分类
正在显示 SKILL.md
| name | datasheet-lookup |
| description | Fetch and summarise the datasheet for a part (or all parts in a project's BOM). Pulls the official PDF when locatable, extracts pinout, electrical characteristics, and typical application notes, and writes a per-part reference into the project directory. |
Get authoritative information for a part.
Either a single part query (e.g. "BME280") or a project slug (process all parts in bom.json).
Write to <projects_dir>/<slug>/datasheets/<part>.md (create the directory if absent):
compatibility-check and generate-wiring-diagram-spec.Cache the PDF itself under $CLAUDE_USER_DATA/hardware-spec-assembly/cache/datasheets/<part>.pdf to avoid refetching.