bambu-local

# Bambu Local - 3D Printer Control Control Bambu Lab printers locally via MQTT without cloud dependency. ## Setup 1. Create virtual environment: ```bash python3 -m venv ~/bambu-env source ~/bambu-env/bin/activate pip install paho-mqtt ``` 2. Create `config.json` in skill folder: ```json { "printer_ip": "192.168.x.x", "access_code": "xxxxxxxx", "serial": "xxxxxxxxxxxx", "printer_name": "MyPrinter" } ``` Get these from your printer: Settings → LAN Only Mode (access code) and Settings → Device (serial). ## Commands ### Status ```bash run ~/thinkfleet/skills/bambu-local/bambu status ``` ### Light ```bash run ~/thinkfleet/skills/bambu-local/bambu light on run ~/thinkfleet/skills/bambu-local/bambu light off ``` ### Print Control ```bash run ~/thinkfleet/skills/bambu-local/bambu print pause run ~/thinkfleet/skills/bambu-local/bambu print resume run ~/thinkfleet/skills/bambu-local/bambu print stop ``` ### Speed (1=Silent, 2=Standard, 3=Sport, 4=Ludicrous) ```bash run ~/thinkfleet/skills/bambu-local/bambu speed 2 ``` ### Temperature ```bash run ~/thinkfleet/skills/bambu-local/bambu temp --bed 60 run ~/thinkfleet/skills/bambu-local/bambu temp --nozzle 200 ``` ### G-code ```bash run ~/thinkfleet/skills/bambu-local/bambu gcode "G28" ``` ## Supported Printers - Bambu Lab A1 / A1 Mini - Bambu Lab P1P / P1S - Bambu Lab X1 / X1C