bambu-local
Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
Source facts
- Repository
- ThinkfleetAI/thinkfleet-engine
- Last source activity
- February 16, 2026 at 17:03
- Detected SKILL.md language
- English
- Stars
- 0
- Forks
- 0
Install options
The review-first prompt is selected by default. You can switch to a direct command or download a local copy.
Review the source files
Read SKILL.md and any companion files shown by SkillsMP before deciding whether to install.
Showing SKILL.md
SKILL.md
Source instructions · Read-only preview- name
- bambu-local
- description
- Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
- homepage
- https://github.com/Doridian/OpenBambuAPI
- metadata
- {"thinkfleet":{"emoji":"🖨️","requires":{"bins":"[Truncated]"}}}
# Bambu Local - 3D Printer Control
Control Bambu Lab printers locally via MQTT without cloud dependency.
## Setup
1. Create virtual environment:
```bash
python3 -m venv ~/bambu-env
source ~/bambu-env/bin/activate
pip install paho-mqtt
```
2. Create `config.json` in skill folder:
```json
{
"printer_ip": "192.168.x.x",
"access_code": "xxxxxxxx",
"serial": "xxxxxxxxxxxx",
"printer_name": "MyPrinter"
}
```
Get these from your printer: Settings → LAN Only Mode (access code) and Settings → Device (serial).
## Commands
### Status
```bash
run ~/thinkfleet/skills/bambu-local/bambu status
```
### Light
```bash
run ~/thinkfleet/skills/bambu-local/bambu light on
run ~/thinkfleet/skills/bambu-local/bambu light off
```
### Print Control
```bash
run ~/thinkfleet/skills/bambu-local/bambu print pause
run ~/thinkfleet/skills/bambu-local/bambu print resume
run ~/thinkfleet/skills/bambu-local/bambu print stop
```
### Speed (1=Silent, 2=Standard, 3=Sport, 4=Ludicrous)
```bash
run ~/thinkfleet/skills/bambu-local/bambu speed 2
```
### Temperature
```bash
run ~/thinkfleet/skills/bambu-local/bambu temp --bed 60
run ~/thinkfleet/skills/bambu-local/bambu temp --nozzle 200
```
### G-code
```bash
run ~/thinkfleet/skills/bambu-local/bambu gcode "G28"
```
## Supported Printers
- Bambu Lab A1 / A1 Mini
- Bambu Lab P1P / P1S
- Bambu Lab X1 / X1C
View on GitHub