bambu-local
Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
Quellinformationen
- Repository
- ThinkfleetAI/thinkfleet-engine
- Letzte Quellaktivität
- 16. Februar 2026 um 17:03
- Erkannte Sprache von SKILL.md
- Englisch
- Sterne
- 0
- Forks
- 0
Installationsoptionen
Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
SKILL.md wird angezeigt
SKILL.md
Quellanweisungen · Schreibgeschützte Vorschau- name
- bambu-local
- description
- Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
- homepage
- https://github.com/Doridian/OpenBambuAPI
- metadata
- {"thinkfleet":{"emoji":"🖨️","requires":{"bins":"[Truncated]"}}}
# Bambu Local - 3D Printer Control
Control Bambu Lab printers locally via MQTT without cloud dependency.
## Setup
1. Create virtual environment:
```bash
python3 -m venv ~/bambu-env
source ~/bambu-env/bin/activate
pip install paho-mqtt
```
2. Create `config.json` in skill folder:
```json
{
"printer_ip": "192.168.x.x",
"access_code": "xxxxxxxx",
"serial": "xxxxxxxxxxxx",
"printer_name": "MyPrinter"
}
```
Get these from your printer: Settings → LAN Only Mode (access code) and Settings → Device (serial).
## Commands
### Status
```bash
run ~/thinkfleet/skills/bambu-local/bambu status
```
### Light
```bash
run ~/thinkfleet/skills/bambu-local/bambu light on
run ~/thinkfleet/skills/bambu-local/bambu light off
```
### Print Control
```bash
run ~/thinkfleet/skills/bambu-local/bambu print pause
run ~/thinkfleet/skills/bambu-local/bambu print resume
run ~/thinkfleet/skills/bambu-local/bambu print stop
```
### Speed (1=Silent, 2=Standard, 3=Sport, 4=Ludicrous)
```bash
run ~/thinkfleet/skills/bambu-local/bambu speed 2
```
### Temperature
```bash
run ~/thinkfleet/skills/bambu-local/bambu temp --bed 60
run ~/thinkfleet/skills/bambu-local/bambu temp --nozzle 200
```
### G-code
```bash
run ~/thinkfleet/skills/bambu-local/bambu gcode "G28"
```
## Supported Printers
- Bambu Lab A1 / A1 Mini
- Bambu Lab P1P / P1S
- Bambu Lab X1 / X1C
Auf GitHub ansehen