bambu-local
Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
Informations de source
- Dépôt
- ThinkfleetAI/thinkfleet-engine
- Dernière activité de la source
- 16 février 2026 à 17:03
- Langue détectée de SKILL.md
- anglais
- Étoiles
- 0
- Forks
- 0
Options d'installation
Le prompt qui vérifie d'abord la source est sélectionné par défaut. Vous pouvez passer à une commande directe ou télécharger une copie locale.
Vérifiez les fichiers source
Lisez SKILL.md et les fichiers associés affichés par SkillsMP avant de décider de l'installer.
Affichage de SKILL.md
SKILL.md
Instructions source · Aperçu en lecture seule- name
- bambu-local
- description
- Control Bambu Lab 3D printers locally via MQTT (no cloud). Supports A1, A1 Mini, P1P, P1S, X1C.
- homepage
- https://github.com/Doridian/OpenBambuAPI
- metadata
- {"thinkfleet":{"emoji":"🖨️","requires":{"bins":"[Truncated]"}}}
# Bambu Local - 3D Printer Control
Control Bambu Lab printers locally via MQTT without cloud dependency.
## Setup
1. Create virtual environment:
```bash
python3 -m venv ~/bambu-env
source ~/bambu-env/bin/activate
pip install paho-mqtt
```
2. Create `config.json` in skill folder:
```json
{
"printer_ip": "192.168.x.x",
"access_code": "xxxxxxxx",
"serial": "xxxxxxxxxxxx",
"printer_name": "MyPrinter"
}
```
Get these from your printer: Settings → LAN Only Mode (access code) and Settings → Device (serial).
## Commands
### Status
```bash
run ~/thinkfleet/skills/bambu-local/bambu status
```
### Light
```bash
run ~/thinkfleet/skills/bambu-local/bambu light on
run ~/thinkfleet/skills/bambu-local/bambu light off
```
### Print Control
```bash
run ~/thinkfleet/skills/bambu-local/bambu print pause
run ~/thinkfleet/skills/bambu-local/bambu print resume
run ~/thinkfleet/skills/bambu-local/bambu print stop
```
### Speed (1=Silent, 2=Standard, 3=Sport, 4=Ludicrous)
```bash
run ~/thinkfleet/skills/bambu-local/bambu speed 2
```
### Temperature
```bash
run ~/thinkfleet/skills/bambu-local/bambu temp --bed 60
run ~/thinkfleet/skills/bambu-local/bambu temp --nozzle 200
```
### G-code
```bash
run ~/thinkfleet/skills/bambu-local/bambu gcode "G28"
```
## Supported Printers
- Bambu Lab A1 / A1 Mini
- Bambu Lab P1P / P1S
- Bambu Lab X1 / X1C
Voir sur GitHub