lunco-theme

name

lunco-theme

description

LunCoSim's centralised theming system. Use this skill whenever you are about to write, touch, or review UI code that involves a color, spacing value, rounding, or egui visual style — in any panel, overlay, widget, gizmo label, or diagram. Trigger on any `Color32::from_rgb`, hex color, `ui.style_mut()`, `visuals.*`, `ctx.set_visuals`, "dark mode", "light mode", "accent color", "highlight", palette tweak, mention of Catppuccin, or work on a typed block-diagram editor (wire colours, class-kind badges). Also trigger when adding a new panel that needs colors, or when the user asks to "restyle", "retheme", or "make it match". The rules here are project-specific — defaults from egui or Bevy alone will lead you to hard-code colors, which violates the Tunability Mandate.

LunCoSim Theming (lunco-theme)

Full API reference: crates/lunco-theme/README.md. This skill is the decision guide for where colors/spacing come from in this repo.

Hard rules

1. No Color32::from_rgb(...), hex literals, or RGBA tuples outside crates/lunco-theme/. Every color in a panel, overlay, widget, or gizmo routes through the Theme resource. If the color you want doesn't exist yet, add a typed field at the right tier — don't inline the value.
2. Palette reads (theme.colors.*) only inside from_palette builders. Anywhere else — including inside extension traits that provide defaults via get_token — is a smell. If the default you want is a palette entry, that's a sign you should be adding a field to SchematicTokens or DesignTokens first.
3. Four tiers, pick the right one. See § Tier guide. Consumer code reads fields; get_token is reserved for resolving pinned user overrides.
4. Never call ctx.set_visuals(...) from a panel. lunco-workbench's layout/render loop already applies theme.to_visuals() to the egui context each frame (it calls ctx.set_visuals(theme.to_visuals()) so chrome panels — menu bar, status bar — paint correctly).
5. Dark/light is theme.toggle_mode(), not a branch on ThemeMode. Overrides survive the toggle automatically.
6. Spacing and rounding come from theme.spacing and theme.rounding, not ad-hoc 4.0 / 6.0 / Margin::same(8.0) literals.

Tier guide

Four tiers. Always work at the highest (most specific) tier that fits. If you're tempted to hardcode a palette entry at a lower tier, you're at the wrong tier — go up a level and add a field.

Tier 1 — DesignTokens (generic semantic, universal to any UI)

Fields on DesignTokens, populated by DesignTokens::from_palette. Colours every UI uses regardless of domain.

theme.tokens.accent
theme.tokens.success
theme.tokens.warning
theme.tokens.error
theme.tokens.text
theme.tokens.text_subdued
theme.tokens.success_subdued

Add a field here when the token is cross-cutting (e.g. a new "destructive-action red" colour).

Tier 2 — SchematicTokens (typed block-diagram editors)

Fields on SchematicTokens, populated by SchematicTokens::from_palette. Colours that any schematic editor uses — Modelica, SysML, electrical CAD, flow charts. Shared vocabulary, one palette→intent mapping.

// Wire colours by connector domain
theme.schematic.wire_electrical   // Pin, Plug
theme.schematic.wire_mechanical   // Flange
theme.schematic.wire_thermal      // HeatPort
theme.schematic.wire_fluid
theme.schematic.wire_signal       // RealInput/Output
theme.schematic.wire_boolean
theme.schematic.wire_integer
theme.schematic.wire_multibody    // Frame
theme.schematic.wire_unknown

// Class/component-kind badges
theme.schematic.class_model_badge
theme.schematic.class_block_badge
theme.schematic.class_class_badge
theme.schematic.class_connector_badge
theme.schematic.class_record_badge
theme.schematic.class_type_badge
theme.schematic.class_package_badge
theme.schematic.class_function_badge
theme.schematic.class_operator_badge
theme.schematic.class_badge_fg

// Schematic-panel typography
theme.schematic.text_muted
theme.schematic.text_heading

Add a field here when you need a new schematic concept (e.g. a "selected wire" colour, a new connector domain).

Tier 3 — Domain translation (extension trait)

A trait on Theme inside the domain crate. Maps domain-specific names (Modelica Pin, parsed ClassType::Model, SysML stereotype) to tier 2 fields. Zero palette reads in the trait body — if the intent isn't in tier 2 yet, go add it there first.

// crates/lunco-modelica/src/ui/theme.rs
pub trait ModelicaThemeExt {
    fn wire_color(&self, connector_type: &str) -> Color32;
    fn class_badge_bg(&self, kind: &ClassType) -> Color32;
}

impl ModelicaThemeExt for Theme {
    fn wire_color(&self, connector_type: &str) -> Color32 {
        let leaf = connector_type.rsplit('.').next().unwrap_or(connector_type);
        let s = &self.schematic;
        match leaf {
            "Pin" | "Plug" => s.wire_electrical,
            "Flange_a" | "Flange_b" => s.wire_mechanical,
            "RealInput" | "RealOutput" => s.wire_signal,
            _ => s.wire_unknown,
        }
    }
    fn class_badge_bg(&self, kind: &ClassType) -> Color32 {
        match kind {
            ClassType::Model => self.schematic.class_model_badge,
            ClassType::Package => self.schematic.class_package_badge,
            // ...
        }
    }
}

Tier 4 — User override (pin a value)

theme.register_override(domain, token, colour) + theme.get_token(domain, token, fallback). Use only when:

• A theme author or end-user needs to pin a specific colour that should not track the palette on dark/light toggle, or
• You're resolving a historic token whose default is itself a tier 2 field (e.g. theme.get_token("modelica", "port_input", theme.schematic.wire_signal)).

get_token is not the pattern for introducing new defaults. If you're writing self.colors.blue as the fallback, stop — the right fix is a new field in tier 2.

How to read Theme

From a Bevy system

fn my_system(
    mut contexts: EguiContexts,
    theme: Res<lunco_theme::Theme>,
) {
    let ctx = contexts.ctx_mut().unwrap();
    egui::Area::new("x".into()).show(ctx, |ui| {
        ui.colored_label(theme.tokens.success, "ok");
        ui.colored_label(theme.schematic.wire_electrical, "bus");
    });
}

From a &mut World widget / WorkbenchPanel::ui_world

Clone the whole Theme out of World before touching ui — you can't hold Res<Theme> and &mut World at the same time:

let theme = world.resource::<lunco_theme::Theme>().clone();
// now render freely with `theme.tokens.*`, `theme.schematic.*`,
// or (for Modelica) `theme.wire_color("Pin")` via the extension trait.

Imports

use lunco_ui::prelude::{Theme, ThemeMode, ThemePlugin}; // re-exported
// or directly:
use lunco_theme::{Theme, ThemeMode, ThemePlugin, DesignTokens, SchematicTokens, ColorPalette};
// Domain extension (if any):
use crate::ui::theme::ModelicaThemeExt;

Picking the right token

Need	Use
Primary/brand action	theme.tokens.accent
Success / ok / online	theme.tokens.success
Warning / caution	theme.tokens.warning
Error / offline / destructive	theme.tokens.error
Body text	theme.tokens.text
Secondary / muted text	theme.tokens.text_subdued
Panel background	theme.colors.mantle
Widget surface	theme.colors.surface0..surface2
Electrical wire	theme.schematic.wire_electrical
Mechanical flange	theme.schematic.wire_mechanical
Signal (Real)	theme.schematic.wire_signal
Class-kind badge	theme.schematic.class_<kind>_badge
Schematic diagram muted text	theme.schematic.text_muted
Domain type → schematic colour	extension trait (theme.wire_color(…))
User-pinned override	theme.get_token(...) with prior register_override

If the answer is "none of these fit" — add a field in the right tier. Tier 1 if the colour is cross-UI; tier 2 if schematic-specific. Don't default tier 3 with palette picks.

Plugin wiring

• lunco-workbench::WorkbenchPlugin auto-adds ThemePlugin — full app shells get it for free.
• Headless UI tests or standalone panel harnesses: add it yourself, app.add_plugins(lunco_theme::ThemePlugin). Without it, Res<Theme> will not be present and systems will panic on access.
• WorkbenchPlugin's layout/render loop is what pushes Theme into the egui context (ctx.set_visuals(theme.to_visuals())). A standalone panel harness without the workbench must apply theme.to_visuals() itself (e.g. ui.style_mut().visuals = theme.to_visuals();).

Dark / light toggle

world.resource_mut::<lunco_theme::Theme>().toggle_mode();

• Preserves all registered overrides.
• The workbench status bar 🌙/☀ button already wires this — don't duplicate it in other panels.
• Don't branch on theme.mode in panel code to pick colors; pick the token and trust Theme::dark() / Theme::light() to have remapped it correctly.

What NOT to do

❌ Don't	✅ Do
Color32::from_rgb(46, 194, 126)	theme.tokens.success
theme.colors.blue in a panel	Add a field to SchematicTokens or DesignTokens
self.colors.blue as a default in an extension trait	self.schematic.wire_electrical field (add if missing)
ui.visuals_mut().override_text_color = Some(...)	Let sync_theme_system push theme.to_visuals()
if mode == Dark { red } else { dark_red }	One token; palette handles the swap
wire_color_for(connector) local function per crate	Domain extension trait returning theme.schematic.wire_*
Margin::same(8.0)	theme.spacing.window_padding
Add a new catppuccin-egui dep in a domain crate	Consume colors via Theme; bridging lives in lunco-theme only

Review checklist

Before merging any UI change, scan the diff for:

• No new Color32::from_rgb, hex, or RGBA tuples outside lunco-theme.
• No theme.colors.* reads outside from_palette builders or tier-4 get_token fallbacks.
• Every new colour goes through theme.tokens.*, theme.schematic.*, or a domain extension trait mapping domain types → those fields.
• New domain-specific colours modelled as extension-trait methods returning theme.schematic.* fields, not inlined at call sites.
• User-specific overrides registered via register_override in the domain plugin's build.
• No new ctx.set_visuals calls in panel code.
• Spacing/rounding pulled from theme.spacing / theme.rounding where a token exists.
• No theme.mode == Dark branches picking colors.

Quick sanity check on an existing file

# Colors that should be routed through theme (ignore lunco-theme itself):
grep -rn "Color32::from_rgb\|Color32::from_rgba" crates/ \
  | grep -v "crates/lunco-theme/"

# Palette reads outside lunco-theme and from_palette builders:
grep -rn "theme\.colors\." crates/ \
  | grep -v "crates/lunco-theme/" \
  | grep -v "from_palette"

# ctx.set_visuals calls (should only be in lunco-ui's sync_theme_system):
grep -rn "set_visuals" crates/

Findings from any command are candidates to refactor into theme tokens at the appropriate tier.